There are many kinds of Omron switches, which can open the circuit and interrupt the current. The most common switch is the equipment switch which operates the electromechanical machine, which is very needed in the industrial production. So what is the main classification of the Omron switch? XIAMEN YUGUAN TRADING COMPANY- PLC DEALER introduces the main classification of the Omron switch and the control and use of all kinds of switches.

When OMRON carries on the production and the research and development of the switch, mainly divides the switch into three kinds, one is the use, the second is the structure, the third is the contact! These switches can be used in industrial production, their effect and performance are also very good, but also in our lives can not lack.

The simplest switch is metal with two contacts, which can form a loop when in contact. When choosing metal, it is also necessary to choose to take into account the corrosion resistance of metal, because most metals will form insulated oxide after oxidation, so there is no way to make the contact work normally, and the selection of contact metal also needs to take into account the conductivity, hardness and mechanical strength, cost and whether it contains toxin. These must be strictly controlled when used in industrial production, because sometimes the electroplating of corrosive metal on the contact point will generally be in the contact surface of the contact, which can avoid the impact of the performance caused by the oxide, and sometimes the contact surface will also use non-metallic, such as conductive plastic switches, in addition to the contact point, it may also lead to the process of connection may not be able to pass through. The contact surface is not only the contact point, but also the contact point, the contact point and the contact point. Therefore, the switch can be carried out according to different types.

Photoelectric switch is a member of OMRON sensor, which is the most widely used in the demand of industrial production. It is used in the good circuit of input and output of photoelectric switch, so it can be used in many industrial production situations. The new generation photoelectric switch is made by common integrated circuit technology and S M T surface installation technology. It can achieve synchronization, anti-mutual interference, high reliability and stable working conditions and advantages in industrial production. This kind of photoelectric switch adopts pulse modulation active photoelectric detection system.

In the industrial production of OMRON, there is also a certain method to select switches. In view of the appearance of the switch, it is necessary to ensure that the appearance of the product is smooth and the flame retardancy is good. All the surface of the product is smooth, but if it is a coarse material, the flame retardancy is not very good, so the flame retardancy is very critical when choosing. A good product panel will not be removed directly by hand, it must be with the help of a certain special tool, but the performance of the general non-mainstream middle and low grade products can be removed at will, so in the use of these, these also need to be paid attention to. The skateboard of the switch is light, the smoother the feel of the hand, the stronger the rhythm, the better the quality, so in the choice of the switch, it is also necessary to make the best choice from the appearance material and the way to use it. if your want more automation spare parts please login in https://www.plcdealer.com.